5 designers with the title of engineer or above, 2 full-time material engineers, 6 technicians, all of whom have worked in well-known domestic and foreign companies;
Yancheng has a production base with a total investment of 120 million yuan. The plant covers an area of 6,000 square meters, of which the total investment in equipment is about 35 million yuan.
Choose aerospace materials, low wear; excellent and reasonable design of internal structure and overall machine; precise processing equipment, standardized production process workshop, quality assurance.
Rucca promises to respond within 2 hours when receiving the buyer's report for repairs, provide a solution within 24 hours, and offer free damaged parts in warranty period.
Rucca is a famous producer and designer of wet grinding and dispersing equipment in China,product list:Inline Dispersing System,Full Series of Bead Mills,Basket Mill,Mixing machine such as High Speed Disperser,Dual Shafts Mixers,Triple Shafts Dissolver,High Shearing Homogenizer,Grinding Beads,and Whole Production Line.
Ink inline dispenser, the hydraulic lifting frame can turn flexibly. It can be used together with the cover to prevent splashing or splashing of materials during work and volatilization of solvent products. It is suitable for batch production, premixing, dispersing and color matching of various liquids.
The powder is evenly dispersed into liquid through high-speed disperser to produce fine powder Some additives are added to the liquid and mixed to store the finished product and protect the deposition or stratification of the material. Pesticide Inline Disperser , It is widely used in coating, fuel, ink, papermaking, adhesive, medicine, chemical industry and other industries to stir, mix, dissolve and disperse two or more liquids and dolly powder.
Battery Slurry Inline Disperser. It is optimized by computational flow field simulation and hydrodynamics. It is installed vertically. Through the double wall pipe, the material and liquid are pumped into the chamber from up to down, which is wetted and dispersed instantly, so as to avoid condensation before entering the main body of the chamber. In addition, due to the low viscosity of the processing zone and the design of the dispersion zone of the machine, the technology can be applied to the whole range of processing materials.
High shear disperser for resin the introduction of high shear disperser for resin disperser mixer is used to dissolve, disperse and mix materials with different viscosities. Through the extremely high peripheral tip speed of the toothed disc, the strong shear force, collision force and friction between the material and the toothed disc can effectively disperse, dissolve and mix the materials. The disperser is widely used in the production of paints, pigments, coatings, resins, inks, chemicals, dyes and pesticides.
The inline disperser operates in circulation mode, so the powder can be fed from the bag through the suction gun or bag feeding station. Through the best flow control, negative pressure is generated in the processing chamber during operation. This negative pressure is used to inhale the powder, so as to minimize the introduction of external air in combination with appropriate powder conveying. Here, the wetting process is not based on the classical rotor stator principle, which realizes dispersion through high shear rate. Due to the pressure gradient between the supply side and the conveying side, the liquid is pressed into the agglomerate structure, so that each particle of the solid is almost ideally wetted in a very short time. Due to the low shear rate, the energy input is significantly lower than that of the traditional rotor stator system, which means that the increase of product temperature is small.
In a inline disperser, dispersion occurs in a mixing chamber, which is reduced to a minimum volume. Therefore, the mixed energy is introduced into the product in the most effective way.